Garrison Practice Test

These questions are part of the practice quiz. Start practicing

• What is the primary function of a relay?
• What type of safety feature is present in the GAU-22 aircraft crew station?
• What term refers to a publication that incorporates all other files and is a new edition?
• What component is essential for the cycling of ammunition in a drum system?
• What is the first step in safing the GAU-8?
• The AGM-114 is carried on the _______.
• Who is authorized to sign for custody issue items?
• What is the main function of the Unit Committed Munitions List (UCML)?
• Is the AIM-9 jettisoned on the A-10?
• Which document outlines the responsibilities regarding nuclear safety in munitions management?
• Which of the following describes a series-parallel circuit?
• What type of inspection is conducted between flight inspection of aircraft components for immediate turnaround or continuation flight?
• Which bomb rack is compatible with the F-15 aircraft?
• What is the function of Ohms in a circuit?
• Where would one likely look for demilitarization requirements?
• The GBU-39 and GBU-53 are also known as what?
• What kind of missiles does the M299 launcher carry?
• The contents of shop bench stock are determined in accordance with which document?
• Which group is exempt from hazardous waste training requirements?
• How many position categories exist for the Personnel Reliability Program (PRP)?
• How is the AGM-65 rocket motor ignited?
• An Aircraft Turnaround Supervisor is required during ________.
• The LAU-118 uses which system to communicate with the F-16?
• What document is needed to request access to the Theater Integrated Combat Munitions System (TICMS)?
• What is the nickname for the AGM-86 missile?
• Which message or report contains investigator analysis, rationale, conclusions, and recommendations to prevent reoccurrence?
• A red diagonal on AFTO 781A indicates what about the equipment?
• What system determines the weapons release sequence when multiple stations are selected in manual release?
• What is the skill level designation for a HELPER?
• Which Technical Order (TO) provides in-depth information about deficiency reporting?
• Which General purpose (GP) bombs weigh 2000 pounds?
• Which missile release system bypasses stations not selected in the firing sequence?
• How often is a wall-to-wall inventory required after the initial inventory when using the Lightening II Support Equipment Management System (LSEMS)?
• A class A and B mishap requires preliminary messages to be sent within how many hours of the on-duty mishap?
• What is the name of the Maintenance Information System used for Maintenance Data Collection (MDC) on the F-22?
• In troubleshooting phases, which phase involves gathering information and reviewing system fault codes?
• The B-61 is classified as which type of weapon?
• Which type of bomb has an explosive weight of approximately 50 percent of the total weight?
• The phase inspection concept is designed to minimize what?
• Which document lists Primary Munitions (PM) and Support Munitions (SM) necessary for operational requirements?
• What type of hazard does a HD 1.3 munition pose?
• Which diagnostic tool is commonly used for troubleshooting aircraft electrical issues?
• If you are in a Personnel Reliability Program (PRP) position, what must you do to retain your status?
• The GBU-54 is identical to which bomb except for an added DSU-38 laser sensor?
• What is the purpose of DAFI 91-204?
• What is required to activate and deploy the AGM-65 from the launcher?
• Which type of munitions issue request is used for unforeseen issues that may prevent a unit from performing its mission?
• The _________ is a mandatory use document for all operational units.
• The 1760 Enhanced Conventional Bomb Module (SECBM) is utilized by which aircraft?
• What aircraft is the LAU-141 associated with?
• What happens if a manual release switch is pressed multiple times?
• Which missile is known for its capability to conduct precise strikes from long ranges?
• Which component is crucial for the detonation of a nuclear device?
• No-Lone Zones contain which of the following?
• What safety measure is essential for environmental compliance in hazardous waste management?
• Which document provides guidance on corrosion control?
• What is a schematic diagram?
• What system is used to document damage to low observable materials?
• What does a single push of the weapons release switch accomplish?
• What safety measure is recommended when working with live electrical circuits?
• Which physical sign is commonly associated with electrical shock?
• Which of these is NOT a potential disqualifying factor for the Personnel Reliability Program (PRP)?
• What guidance provides information on the nuclear munitions enterprise?
• The Cluster Bomb Rack (CBR) is associated with which aircraft?
• The AGM-158 is also known as what?
• What is the function of a plunger in a solenoid?
• Which pylon is specifically used for nuclear stores on B-52 aircraft?
• A YELLOW TAG is used to indicate what?
• How many volts does it take for the human body to feel a static discharge?
• What is one of the four main conditions requiring boresight?
• What is the main goal of the Personnel Reliability Program (PRP)?
• What does a PREFLIGHT Inspection ensure?
• What must be done before performing any aircraft fuel cell maintenance?
• In the Computerized Maintenance Management System (CMMS), which option brings up the checkout user in Support Equipment Status?
• What does the abbreviation RAB stand for in a security context?
• What solenoid component physically moves a mechanically operated device?
• Which type of circuit typically has the highest risk of short circuiting?
• Which ejector rack is installed on the smart rack assembly?
• On the F-22, which items are jettisoned?
• AIM-120 missiles use _________ for target acquisition.
• Who is responsible for maintaining AFTO Form 95 or equivalent on equipment?
• In emergency first aid for an electrical shock victim, what should you ask someone to retrieve?
• Which circuit is energized by the relay?
• What is the importance of reading cautions and warnings aloud during nuclear operations?
• What is the commonly known name for the AGM-88 missile?
• What type of bomb rack is typically used on a B-2 bomber?
• The AGM-114 missile is carried on which equipment?
• The BRU-57 is used in connection with which type of aircraft equipment?
• What must be included with all due in from maintenance (DIFM) items being returned?
• If lightning is within a specific distance of the flight-line, what action must be taken?
• What do graphic symbols depict in a schematic diagram?
• In accordance with Weapons Systems Safety Rules (WSSR), who are individuals responsible for reporting nuclear safety hazards and deficiencies to?
• What is the primary concern of maintaining AFTO Form 95?
• What is used to ensure only authorized personnel are in the area when munitions are on the flight-line?
• For what reason might a fixed resistor be used in a circuit?
• What does "manual release" mean in the context of weapons release operations?
• What type of release is NOT a characteristic of multi-barrel type weapons?
• What would happen in an open circuit?
• Air-to-ground (A/G) weapons may have which types of missiles attached?
• Which aircraft uses the Smart Bomb Rack Assembly (SBRA)?
• What characterizes a series circuit?
• What type of safe does the GAU-22 have in the aircraft crew station?
• What happens to current in a circuit when resistance is increased?
• Which tag indicates a condition requiring immediate attention and likely grounding?
• What type of bomb rack does the B-52 utilize?
• Which regulation states the requirements for personnel who have access to nuclear weapons?
• For a class __________ mishap the final message or report should be completed within how many days?
• A class A and B mishap requires preliminary messages to be sent within how many hours of the on-duty mishap?
• Are the AIM-120 and AIM-9 jettisoned on the F-16?
• Which code would be considered a due in from maintenance (DIFM) asset?
• What is the correct method for routing wire bundles?
• Which Technical Order (TO) contains information about Special Purpose Recoverable Authorized Maintenance (SPRAM) items?
• What role does the ammunition drum play in ammunition handling?
• Which guideline drives the proper disposal of hazards and environmental protection from hazardous waste?
• What guidance provides information on nuclear munitions enterprise?
• Is it possible to jettison the pylons of the F-35 aircraft?
• What does an aircraft's -1 Flight Manual NOT list?
• Which Technical Order provides guidance on the Air Force Technical Order System?
• An unauthorized arming of a nuclear weapon is referred to as what?
• Where can one locate specific inspection requirements for an aircraft?
• To access a production asset inspection requirement in ALIS, which option should be selected from the dropdown menu?
• What additional form is required when using a DD Form 1577-2?
• What type of failure occurs with a damaged ESD if it passed a bench check but failed under stress?
• What is the significance of the color code system in condition tags?
• On which aircraft can no AIM-9 or AIM-120 missiles be jettisoned?
• Is the AIM-9 ever jettisoned on the F-16?
• Which inspection is required after a specific number of flight hours or the expiration of a calendar period?
• What type of bomb has an explosive weight of approximately 50 percent of the total weight?
• What role does the AFTO Form 350 play in maintenance documentation?
• Training records are maintained electronically through which system?
• Which aircraft is designed to use the F-35's pylons?
• Who must you coordinate munitions turn-in with?
• Which General Purpose (GP) bombs weigh 1000 pounds?
• Which type of contact is most commonly found in multi-pin connectors?
• The final message or report for a class C through E mishap must be submitted within how many days?
• What category is assigned to explosive ordnance disposal (EOD)?
• A GREEN TAG is used to indicate what?
• What happens to munitions in the automatic release system when conditions are unmet?
• Which gun is flown on the F-22 aircraft?
• What component moves ammunition longitudinally in an aircraft?
• How often does the weapons safety office review the explosive location map?
• What is the primary focus of a Periodic Inspection?
• A JOURNEYMAN represents which skill level?
• What are the two categories into which DoDM 5210.42_AFMAN 13-501 divides individuals in the Personnel Reliability Program (PRP)?
• What is the skill level of a SUPERINTENDENT?
• What fire division is assigned when the hazard is a mass explosion?
• What type of ammo handling system stores rounds in a serpentine trackway inside a large outer container?
• Can F-16 pylons be jettisoned?
• What is required to achieve the 5-skill level, Journeyman?
• A BROWN TAG indicates which status?
• Which AFTO 781 form is primarily used for documenting calendar and hourly inspections?
• Which page in the Computerized Maintenance Management System (CMMS) provides situational awareness of an aircraft's current weapons configuration?
• Where is the completion of HAZCOM training documented?
• Which of the following is part of the AFTO Form 244 documentation?
• The loss, theft, or seizure of a nuclear weapon would be categorized as what?
• Which guidance provides information on personal duties and responsibilities concerning Weapons Systems Safety Rules (WSSR)?
• Supervisors must ensure personnel are aware of changes to which program in accordance with Weapons Systems Safety Rules?
• What is the primary purpose of a wall-to-wall inventory?
• Which report contains investigator analysis, rationale, conclusions, and recommendations to prevent reoccurrence?
• What type of damage is recorded in LOHAS?
• Which group is responsible for identifying categories in the context given?
• To which Major Command (MAJCOM) would weapons personnel be assigned for testing new weapon systems?
• What is the role of the weapons release priority system during multi-station operations?
• Which of the following does NOT apply to a multi-barrel type weapon?
• To apply for a RAB, what must you request from your security manager?
• Air to ground missiles attach directly to which of the following?
• Which of the following circuits has both series and parallel characteristics?
• What term is used for a fire that is extensive and difficult to control, typically involving large fuel sources?
• Which type of turn-in is applicable for dummy rounds used for testing gun systems?
• AIM-9 Missiles track their target using what technology?
• What type of deficiency is found in new or newly reworked government-owned products that do not fulfill their intended purpose?
• Who designates a Restricted Area Badge (RAB) issuance official?
• Which of the following aircraft features the GAU-18 gun?
• Who is responsible for the protection of all government property?
• What is the primary function of a pylon in an aircraft context?
• What condition does a BROWN TAG indicate?
• When resistance is increased in a circuit, what happens to the current?
• Deficiencies for the Master Nuclear Certified Listing (MNCL) and items on the list are reported according to which document?
• What is the well-known name of the AGM-176 missile?
• What is the role of a resistor in an electrical circuit?
• What is the primary function of the Security Forces (SF) in a controlled area?
• Which General purpose (GP) bombs weigh 500 pounds?
• What type of harness features wires with thinner insulation?
• Disassembly of munitions is ______?
• What is the priority classification for a Time Compliance Technical Order distributed within 5 days of receipt?
• Are the AIM-120 and AIM-9 jettisoned on the F-15?
• What guidance incorporates maximum nuclear surety consistent with operations?
• What is the primary function of the gun safety pin in the GAU-8?
• What term describes electrical pressure from a power source such as a battery?
• Which of the following missiles is typically deployed from aircraft for ground attack?
• Are the pylons on the F-22 jet jettisonable?
• What is an example of a condition requiring boresight in military operations?
• What status does a YELLOW TAG indicate?
• Which component initiates the explosive chain to detonate a bomb?
• How is unauthorized personnel kept out of an area when munitions are present?
• In the manual release option, what determines the weapons release sequence if multiple stations are selected?
• What is required of personnel involved with munitions handling?
• What is the primary purpose of the Personnel Reliability Program (PRP)?
• What is the purpose of a resistor in a circuit?
• Which of the following is NOT typically included in aircraft armament circuits test sets?
• Which aircraft uses the LAU-151 launcher?
• Which gun is used on the HH-60 aircraft and can be reloaded midair?
• What is the first page displayed in the Computerized Maintenance Management System (CMMS) upon logging in?
• Which section is NOT included in the Armament Flight?
• Which command is responsible for providing air power to maintain a free and open Indo-Pacific region?
• What is required during a Concurrent Servicing Operation (CSO) when fueling is taking place?
• What type of munitions is a JASSM classified as?
• When performing a visual inspection on a connector, which part should be undamaged?
• Which publication outlines safety procedures for nuclear weapons?
• What effect does increasing resistance have on a circuit?
• What priority of change request is made for non-urgent issues?
• In Alternating Current (AC), what does the signal do periodically?
• What does a RED TAG signify regarding equipment condition?
• What defines a parallel circuit?
• Which type of fire is characterized as being serious but not uncontrollable, often manageable with proper resources?
• What type of deficiency is considered an unacceptable condition affecting operational safety?
• When testing live circuits, what precaution should be taken regarding hand position?
• The Paveway series of bombs primarily utilize which type of guidance?
• What color condition tag indicates an Unserviceable condemned item or component?
• What type of information should not be shared with unauthorized personnel?
• In electrical terms, what does the term 'decreased current' imply?
• Which process is identical for both the GAU-18 and GAU-21 guns?
• To identify a nuclear fault, what should you use?
• What does a grounded circuit indicate?
• Which pylon is utilized on B-52 aircraft for conventional stores?
• What is the first step in troubleshooting?
• What safety feature is used to ensure the LAU-106 launcher is electrically safe?
• Which cable standard is critical for military aircraft weapon systems?
• What highlights a procedure that must be strictly observed to ensure personnel safety?
• At which skill level is an APPRENTICE categorized?
• Which document provides appropriate timeline information for report submissions and guidance on report formatting?
• What is a common feature of F-16 pylons compared to F-15 pylons?
• Which regulation provides detailed guidance on filling out AF Form 2005?
• Which of the following is a requirement for the posting of No-Lone Zone signs?
• What type of change request could result in personnel injury, damage to equipment, or jeopardize mission safety if not corrected?
• Are the F-15 pylons jettisonable?
• How is amperage defined in electrical terms?
• What is the jettison status of the AIM-9 on the F-22?
• What is highlighted as a crucial procedure that, if neglected, may cause damage to equipment or loss of mission effectiveness?
• What type of munitions is classified as Load Asset in TICMS?
• What type of training must all personnel working with hazardous waste complete?
• What component in a solenoid returns the plunger to its original position?
• Where can the AFTO Form 244 and 245 typically be found for most equipment?
• Which of the following does NOT apply to a multi-barrel type weapon?
• Which publication contains information about the No-Lone Zone and its requirements?
• What should all personnel ensure before conducting munitions operations?
• Which tag indicates that an item or component is unserviceable and condemned?
• What is checked during the phase of troubleshooting that involves system analysis?
• What type of information does the 781A show?
• What is an open circuit?
• Which regulation governs the use, returns, and disposal of government materials?
• What is used to measure the flow of electric current?
• The purpose of a Status message is to provide which of the following?
• What construction feature characterizes ammunition chutes?
• When performing nuclear operations, how must cautions, warnings, and notes be communicated to all technicians?
• The 781H provides what type of status information?
• What provides information on environmental and hazardous material compliance in military operations?
• What regulation provides information on the weapons safety program?
• What is the most common type of resistor used in electronics?
• What component is essential for effective troubleshooting of electrical systems?
• Who is responsible for determining if a Weapons Systems Safety Rules (WSSR) fault is critical?
• What is a short circuit?
• Who may authorize munitions issue requests through email, verbal, or written communication?
• What is the firing rate of the 30MM GAU-8 gatling gun?
• Which weapon will clear itself after each burst due to delay circuitry?
• On which type of aircraft is the M299 launcher primarily flown?
• Unusual behavior observed on the field should be reported according to which guidelines?
• What process is identical for both the GAU-21 and the GAU-18 guns?
• What class of missile is the AGM-114?
• When repairing braided shield wire, if the hole in the braiding is 50% or less of the wiring harness diameter, what should be used?
• What type of Inspection assesses aircraft based on age rather than utilization?
• In which part of the AFTO Form 244 can scheduled inspections be found?
• Before declaring a nuclear fault as non-critical, personnel must identify faults in which manner?
• Which aircraft is not known for jettisoning AIM-120?
• No-Lone Zones contain ____________, nuclear weapon systems, or critical components.
• Which term describes the breaking apart of an object into pieces, often with significant impact?
• Electrostatic discharge can cause how many different types of failures in ESD sensitive devices?
• Where can you find a list of all hazardous chemicals present in your work area?
• What mechanism moves ammunition longitudinally from the entrance unit to the exit unit?
• What does a BLUE TAG signify?
• In a connector system, what type of connector mates with a wire or cable?
• Which launcher is classified as the Configurable Rail Launcher (CRL) used on F-22 aircraft?
• Which element is responsible for performing modifications on guns that are off-equipment?
• Which guidance provides the criteria on flag words for reporting?
• A GREEN TAG represents what kind of equipment status?
• What categories are assigned to methods and procedures Technical Orders (MPTOs)?
• Which inspection translates flying hour utilization rates into calendar periods?
• What type of ammo handling system component stores and moves ammunition longitudinally?
• What fire division is designated when the hazard involves a mass explosion?
• When is the munitions released during the automatic release option?
• How do you identify the resistance value on a fixed resistor?
• Is the ALCM jettisoned with the pylon on the B-52?
• Which online program facilitates scheduling for turn-in and disposal by accumulation point managers?
• The M299 launcher is used on which aircraft?
• What completes the circuit from the power source's positive terminal through the structure when the negative lead touches the structure?
• In the Theater Integrated Combat Munitions System (TICMS), a munition that is NOT in a __________ is a Load Asset.
• How often are physical inventories of munitions required to be conducted?
• Which technical order provides inspection intervals for A-10 aircraft?
• Which of the following indicates that a piece of equipment is not safe to use?
• What name is used for the AGM-158 missile system?
• Which gun utilizes the clearing sector holdback tool to force the bolts into the clearing path?
• Cluster Bomb Units (CBU) are classified as what type of system?
• Who determines if a Weapons Systems Safety Rules (WSSR) fault is critical?
• According to AFMAN 21-206, what is one of the minimum required fields for AF Form 2430?
• What is the maximum allowable slack between support points?
• What is the slack distance between support points?
• How do you verify that the 105mm howitzer is clear?
• What type of bomb is characterized by having a high explosive weight ratio?
• Which aircraft can interchangeably use LAU-105 and LAU-117?
• What does the selective mode do in relation to circuit power?
• What component ensures that all contacts in a connector align properly?
• Which condition is one of the four main conditions requiring boresight?
• No-Lone Zone signs should be posted ____________.
• A BASIC POST FLIGHT Inspection occurs after what event?
• Which tech data provides self-test procedures for a voltage detector and adapter cables?
• What type of hazard does a HD 1.2 munition pose?
• Tamper seals are connected to which of the following?
• What type of failure can electrostatic discharge (ESD) commonly cause?
• Rounds of ammunition are categorized as what type of item in the Theater Integrated Combat Munitions System?
• Are the A-10 pylons jettisonable?
• What type of resistors are typically used in circuits with power requirements exceeding 2 watts?
• What elements are included in the definition of a Production Asset Inspection Requirement (PAIR)?
• Which type of munitions issue request is used for unforeseen issues that may prevent a unit from performing its mission?
• When is a THRU FLIGHT Inspection typically conducted?
• What is the minimum requirement to achieve the title of 9-skill level Superintendent?
• What division applies to situations involving a potential mass explosion hazard?
• When referring to aircraft condition, which tag would indicate an item is unserviceable but repairable?
• When repairing braided shielding, how much should the heat shrink tubing overlap be?
• Which regulatory directive mandates FOD prevention measures around aircraft and related equipment?
• A short in a circuit can be identified by which of the following?
• The Alternate Mission Equipment Tracking System (AMETS) tracks and monitors which type of inventory?
• What does the 781K document?
• What is the nickname for the AGM-65 missile system?
• Your organization retains accountability for an item until what occurs?
• What is the nickname for the AGM-114 missile system?
• How is the BRU-57 suspended from the aircraft?
• What is the first step in troubleshooting after gathering information on a fault?
• What document provides a roadmap for training required for career progression in the aircraft armament system?
• The EOR Inspection is performed for what purpose?
• Which aircraft utilizes the BRU-57 bomb rack?
• Which missile is classified as a standoff weapon designed to defeat enemy air defenses?
• Which aircraft uses the LAU-105 and LAU-117 launchers?
• What skill level corresponds to a CRAFTSMAN?
• The Paveway series of bombs primarily utilize which type of guidance?
• When acquiring hazardous materials, which process should be used?
• What enables the 105mm howitzer to move in elevation and azimuth?
• What does MIL-STD-1760 cable allow communication between?
• What type of bomb release allows weapons to be released once predetermined parameters have been met?
• ____________ provides appropriate timeline information for report submissions and guidance on how a report should be formatted.
• What does voltage measure in an electrical context?
• What document outlines personal responsibilities concerning Nuclear Weapons Security?
• Which page in the Theater Integrated Combat Munitions System (TICMS) displays potential munitions violations?
• Which bomb rack is used by the A-10 aircraft?
• What is the firing rate range of the GAU-2, 7.62mm gatling gun?
• What type of explosion is characterized by a rapid increase in pressure and temperature, often resulting in widespread damage?
• Are pylons jettisoned on the F-15?
• What is the purpose of the shipments grid in the Lightening II Support Equipment Management System (LSEMS)?
• Who has the authority to change the inspection time constraints for local operating conditions?
• Which of the following is NOT a sign of electrical shock?
• What type of defect is characterized by inoperable systems or other mission limiting discrepancies that are suspected as non-conformance to applicable specifications?
• Which aircraft utilizes the LAU-118?
• What is the most common type of resistor used in circuits?
• Which type of inspection focuses on reducing aircraft downtime?
• Which of the following are NOT defined as Nuclear Certified Equipment (NCE)?
• What routes circuit power to the selected station for release in an aircraft?
• Which type of mounting allows for versatile targeting with artillery equipment?